Hydra Input / Output Expander +DMX512 for Sprite DV-S4-4K Medeawiz Corp. H9X28D
Path: DIGITAL SIGNAGE | Options and Accessories | Accessories for Sprite DV-S4
Before: 79,00 €
RRP: 69,00 €
Hydra Input Expander + Outputs + DMX for Sprite DVS4-4K
The Hydra has 9 inputs + Motion input + DMX input and 8 sinking outputs
The Hydra has about 40 pre-programmed modes of operation that you can select.
We've taken many of our custom programs and included them at no charge!
Up to 25 pushbtton / trigger inputs
Motion sensor input with user selectable re-trigger delay
DMX512 input to control a Sprite from DMX
Delayed file trigger mode
Next file / previous file trigger mode
Can control 2 Sprites in some modes
Telephone type keypad mode for up to 99 triggered files
Alternate loop and trigger files modes
The default mode has up to 8 pushbuttons to play 8 files + 8 outputs
Turns on each output while the corresponding file 1 to 8 is playing
The outputs are for 5 to 24 Volts DC for small lamps or relays
Can drive relays to control larger voltages and loads
Plugs into the Sprite® with the included cable
Powered from the Sprite®
External power supply required for the outputs, not included
Screw terminals to connect pushbuttons and outputs
Based on a PIC processor, it can be re-programmed
We can provide custom programming to do many things
We can custom program the Hydra for you
There are endless ways we can program the Hydra to interact with the Sprite® DV-S4.
Just tell us what you need and we'll give you a quote.
Here are some examples:
Use pushbutton inputs to go to the next or previous file
Use an input to select a different loop file
Use buttons to increase and lower volume
Use buttons to step through the video files
Add time delays at different points
Program a sequence or "code" required to play a file
Add ultrasonic range sensor and program file to play at certain distance
Got an idea? If you can think it, we can probably make it :).
Documents and links H9X28D - Hydra Input/Output Expander - High Resolution Picture ( 3.53 MB ) H9X28D - Hydra Input/Output Expander - User Manual ( 2.08 MB )
RELATED PRODUCTS
 |
Motion Sensor for MedeaWiz Sprite DV-S4-4K
Options and Accessories
Accessories for Sprite DV-S4
|
Before: 36,00 €
RRP: 30,00 € |
|
| |
The MSA-B is a packaged "stealth" black PIR motion sensor that is Plug-N-Play for the Sprite® It will trigger file 001 on the Sprite® when motion is detected crossing its view. It is pre-wired to plug directly into the Sprite's I/O port. |
 |
MedeaWiz Sprite® 4K DV-S4 Video Repeater - Media Player
Media Players
Full HD & 4K
|
Before: 169,00 €
RRP: 147,00 € |
|
| |
Elevate your multimedia experience with MedeaWiz's Sprite® 4K DVS4: a standalone 4K player featuring auto-start, loop playback, and advanced control via push-buttons and RS-232. |
 |
Serial Splitter Board
Options and Accessories
Accessories for Sprite DV-S4
|
Before: 65,00 €
RRP: 56,00 € |
|
| |
The SS-38 is a serial splitter that enables control and synchronization of up to eight Sprite DVS4-4K media players from a single point. It provides one input and eight outputs for effective management. Ideal for ensuring coordinated playback across multiple screens, and can be expanded by connecting multiple units. |
PRODUCTS WITHIN THE SAME FAMILY ACCESSORIES FOR SPRITE DV-S4
| |
Motion Sensor for MedeaWiz Sprite DV-S4-4K
Ref: MSA-B-PIR
Options and Accessories
Accessories for Sprite DV-S4
|
Before: 36,00 €
RRP: 30,00 € |
|
| |
The MSA-B is a packaged "stealth" black PIR motion sensor that is Plug-N-Play for the Sprite® It will trigger file 001 on the Sprite® when motion is detected crossing its view. It is pre-wired to plug directly into the Sprite's I/O port. |
| |
Serial Splitter Board
Ref: SS-38
Options and Accessories
Accessories for Sprite DV-S4
|
Before: 65,00 €
RRP: 56,00 € |
|
| |
The SS-38 is a serial splitter that enables control and synchronization of up to eight Sprite DVS4-4K media players from a single point. It provides one input and eight outputs for effective management. Ideal for ensuring coordinated playback across multiple screens, and can be expanded by connecting multiple units. |
PRODUCTS FROM THE SAME MANUFACTURER
 |
RS232C Interface Control Cable for DV68
Ref: DV-66RS
Options and Accessories
DV-68 Accessories
|
RRP: 40,00 € |
|
| |
The RS-232 Cable enables the DV-68 player to be controlled from any PC or show controller with a standard 9-pin serial port. |
| |
Motion Sensor for MedeaWiz Sprite DV-S4-4K
Ref: MSA-B-PIR
Options and Accessories
Accessories for Sprite DV-S4
|
Before: 36,00 €
RRP: 30,00 € |
|
| |
The MSA-B is a packaged "stealth" black PIR motion sensor that is Plug-N-Play for the Sprite® It will trigger file 001 on the Sprite® when motion is detected crossing its view. It is pre-wired to plug directly into the Sprite's I/O port. |
 |
Medeawiz Sprite DV-S1 Video Repeater - Media Player
Ref: DV-S1
Media Players
Full HD & 4K
|
|
| |
Full HD video repeater with autoplay function when power on and controllable by RS-232 or push-buttons. |
| |
MedeaWiz Sprite® 4K DV-S4 Video Repeater - Media Player
Ref: DV-S4
Media Players
Full HD & 4K
|
Before: 169,00 €
RRP: 147,00 € |
|
| |
Elevate your multimedia experience with MedeaWiz's Sprite® 4K DVS4: a standalone 4K player featuring auto-start, loop playback, and advanced control via push-buttons and RS-232. |
 |
Contact Closure Control Board for DV-68
Ref: DV-66K
Options and Accessories
DV-68 Accessories
|
RRP: 60,00 € |
|
| |
The DV66K controller provides the means to integrate reliable, heavy duty pushbuttons, motion sensors, membrane keypads, numeric keypad, or any contact closure into DV68 digital media player. |
| |
Serial Splitter Board
Ref: SS-38
Options and Accessories
Accessories for Sprite DV-S4
|
Before: 65,00 €
RRP: 56,00 € |
|
| |
The SS-38 is a serial splitter that enables control and synchronization of up to eight Sprite DVS4-4K media players from a single point. It provides one input and eight outputs for effective management. Ideal for ensuring coordinated playback across multiple screens, and can be expanded by connecting multiple units. |
|
|
|
